Compare Products

Hide

Clear All

VS

Picture

RG-S5750-24SFP4XS24DP-UP, 24-Port Gigabit All-Optical Ethernet PoF Switch, 10GE Uplink, Hybrid Cable Connection, Up to 100 W Power Output per Port

Applied in Ruijie Networks Power over Fiber (PoF) Solution, integrated installation and O&M for power and optical transmission over hybrid cables

Modelos
Características destacadas
  • Hybrid cable connection in Ruijie Networks PoF Solution, providing worry-free remote power supply
  • Virtual Switching Unit (VSU), delivering flexible networking and high performance
  • Hardware-level redundancy, enhancing system reliability
  • Multiple security policies to prevent network attacks and ensure high network robustness
  • INC controller, offering simplified and efficient O&M
Sales Enquiry
Features

24-Port Aggregation All-Optical Ethernet PoF Switch on Building Side RG-S5750-24SFP4XS24DP-UP

The switch supports up to 24 hybrid cables, each capable of supplying up to 100 W of power and transmitting optical signals to connected devices. This integrates power and optical transmission and simplifies installation and O&M.

Connection over Hybrid Cables in PoF Solution and Centralized Deployment, Enabling Worry-free Remote Power Supply

The switch utilizes a hybrid cable that implements both high-bandwidth data transmission and remote PoF power supply, realizing integrated installation and O&M, and simplifying all-optical network deployment.

Extended Transmission Range

The connection distance between a PoF switch and an SOE indoor switch can reach up to 1,500 meters.

Increased Power Capacity

A single port can deliver a maximum power of 100 W, while the entire switch supports a maximum power supply of 2400 W (24 x 100 W).

Enhanced Power Supply

The switch can connect 24 SOE switches or photoelectric access points (APs).
Hybrid cables are used to provide secure power supplies from the equipment room, eliminating the need for local high-voltage power sources.

VSU, Delivering Flexible Networking Capabilities and High Performance

VSU technology virtualizes multiple physical switches into one logical unit to realize unified management, simplifying O&M.
A VSU connects to peripheral devices through aggregate links. If a fault occurs, data can be switched to another link within seconds, ensuring service continuity.
Devices can be added to or removed from a VSU, without affecting normal operation of other devices.

Hardware- and Software-level Redundancy, Enhancing System Reliability

The switch utilizes a hybrid cable that implements both high-bandwidth data transmission and remote PoF power supply, realizing integrated installation and O&M, and simplifying all-optical network deployment.

Dual-boot Redundancy

Two flash chips are used to store boot software, enabling automatic backup of the boot file and operating system. This prevents device startup failure caused by flash chip malfunction, ensuring smooth services.

1+N Power Supply Redundancy

A maximum of three power modules can be configured, supporting redundancy and hot swapping and ensuring continuous system power supply.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

CPP protects the CPU from data attacks to ensure CPU stability under high usage, achieving significant improvement in the device's security performance.

INC Controller Achieves Easy and Efficient O&M Management

The switch automatically completes registration and configuration after it accesses the all-optical network, achieving plug and play, no commissioning and fast onboarding.
You can check the link health status, handle alarms and troubleshoot faults through the INC, which dramatically improves the O&M efficiency.
A switch can be flexibly replaced based on service needs without reconfiguration. Service ports supports auto-sensing, achieving automatic O&M.
Fast onboarding
Optical Link O&M
Zero Touch Replacement

Specifications

Hardware Specifications

RG-S5750-24SFP4XS24DP-UP

Port

24 x 1000M SFP ports, 4 x 1G/10G SFP+ ports, and 24 x power output ports

Switching capacity

128 Gbps

Packet forwarding rate

96 Mps

Power module slot

3

Power module type

Available model: RG-PA600I-P-F

AC input

Rated voltage range: 200 V AC to 240 V AC

Maximum voltage range: 176 V AC to 264 V AC

Frequency: 50 Hz to 60 Hz

Rated current per input: 8 A

Available model: RG-PA1000I-P-F

AC input

Rated voltage range: 200 V AC to 240 V AC

Maximum voltage range: 176 V AC to 264 V AC

Frequency: 50 Hz to 60 Hz

Rated current per input: 8 A

SFP port

1000Base-X

100Base-X

SFP+ port

10GBase-R

1000Base-X

RTC

Supported

Power consumption

< 85 W

Operating temperature

0°C to 45°C (32°F to 113°F) at the altitude of 0 m to 1,800 m (0 ft. to 5905.51 ft.)

At the altitude ranging from 1800 m (5905.51 ft.) to 5000 m (16404.20 ft.), the temperature decreases by 1°C (1.8°F) each time the altitude increases by 220 m (721.79 ft.).

Storage temperature

–40°C to +70°C (–40°F to +158°F)

Operating humidity

10% to 90% RH

Operating altitude

0 m to 5000 m (0 ft. to 16404.20 ft.)

Storage humidity

5% to 95% RH

Fan module

Fan speed regulating and fault alarms

Temperature alarms

Supported

EMI

GB/T9254.1-2021 Class A

Safety standard

GB4943-2011

Dimensions (W x D x H)

442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)

Weight (including power modules)

10 kg (22.05 lbs)

 

Software Specifications

RG-S5750-24SFP4XS24DP-UP

802.1Q VLAN

4K 802.1Q VLAN

Port-based VLAN

MAC address-based VLAN

Private VLAN

Voice VLAN

GVRP

QinQ

Basic QinQ

Selective QinQ

ACL

Standard IP ACLs (hardware ACLs based on IP addresses)

Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)

Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)

Time range-based ACL

Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

ACL80

IPv6 ACL

Global ACL

ACL redirection

QoS

Traffic identification on an interface

Rate limiting on an interface

Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences

Eight queues on each interface

SP, WRR, SP+WRR, and RED/WRED

Mirroring

1:1 mirroring, N:1 mirroring, and 1:N mirroring

RSPAN

Local and remote flow-based mirroring

DHCP

DHCP server

DHCP client

DHCP snooping

DHCP relay

DHCPv6 snooping

DHCPv6 client

DHCPv6 relay

Security

Binding of IPv4 addresses, MAC addresses, and interface numbers

Binding of IPv6 addresses, MAC addresses, and interface numbers

Filtering unauthorized MAC addresses

Interface- and MAC address-based 802.1X authentication

MAB

Portal and Portal 2.0 authentication

ARP check

DAI

ARP rate limiting

ARP spoofing prevention

Broadcast storm suppression

Hierarchical management and password protection

RADIUS and TACAS+

AAA (IPv4/IPv6) for device login management

SSH and SSHv2.0

BPDU guard

IP source guard

CPP and NFPP

Port security

Ring network protocol

ERPS (G.8032), compatibility with third-party ERPS-capable products

PoE

IEEE 802.3af and 802.3at

Automatic and energy-efficient power supply management modes

Warm start

Scheduled power-on and power-off of PoE ports based on the time range

Port priority

IP routing

IPv4/IPv6 static route

RIP, RIPng, OSPFv2, OSPFv3, BGP, and IS-IS

Routing Policy

Basic IPv6 protocols

IPv6 addressing, ND, ICMPv6, IPv6 ping, IPv6 tracert, and IPv6 multicast

SAVI

Defense against NS/NA/RS/RA packet attacks

Preventing private IPv6 address allocation

Unauthorized terminal information buffering

VSU

Local and remote stacking

Link bundling across the chassis inside the VSU

Virtualization through standard service interfaces

Zero Touch Provisioning (ZTP)

CWMP (TR069)

Management

SNMPv1/v2c/v3, CLI (Telnet/console), RMON (1, 2, 3, 9), SSH, Syslog, NTP/SNTP, web, debugging, FTP, TFTP, sFlow, and Ruijie Cloud

Show More
Resources All Resources
Learn about Products or Solutions
Installation
Software and Configuration
Order Information

Chassis, Power Module, and Accessories

Model

Description

RG-S5750-24 SFP4XS24DP-UP

Aggregation all-optical switch (PoF switch) for buildings, 24-port fixed all-optical switch

24 x downlink combo ports (1GE SFP port and DB78 port)

4 x 1GE/10GE uplink SFP+ ports with auto-negotiation

24 power outputs over hybrid cables, with a maximum of 100 W per output, and up to 2,400 W per device

Up to three power modules

RG-PA1000I-P-F

1000 W AC power module

RG-PA600I-P-F

600 W AC power module

RG-24DUP1DB48LC

Hybrid cable termination box, 24 power outputs per panel, configured based on the number of hybrid cables



Model

Description

OEHC-0.5-1000M

Hybrid cable, cross sectional area of 0.5 mm2, each bundle of 1,000 m (3,280.84 ft.), configured according to the solution

OEHC-1.5-1000M

Hybrid cable, cross sectional area of 1.5 mm2, each bundle of 1,000 m (3,280.84 ft.), configured according to the solution



Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Submit
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contáctenos

Contáctenos

How can we help you?

Contáctenos

Get an Order help

Contáctenos

Get a tech support