Compare Products


Clear All


Sales Enquiry

Building a High-Speed and Efficient Network with Wi-Fi 6

Indoor Access Point RG-AP810-L

Wi-Fi 6

1.775 Gbps wireless throughput

Maximum 4 spatial streams

PoE and DC power supply

Free cloud management

1.775 Gbps High Speed with Wi-Fi 6

High speed:
1024QAM modulation, 25% higher data transfer rate than 802.11ac
High concurrency:
OFDMA and MU-MIMO transfer technologies, 4x more concurrent users than Wi-Fi 5
High security:
Next-gen wireless encryption protocol WPA3 significantly enhances wireless security
Low latency:
OFDMA technology reduces the delay to as low as 20 ms, improving UX in video and audio services

Intelligent Roaming Technologies, Full Wi-Fi Coverage

Intelligent roaming with 802.11k/v/r protocols, enabling clients to seamlessly access APs with stronger signals,
and achieving low roaming delay and zero stalling during roaming.

PoE and DC Power Supply, Flexible Deployment

With PoE in, a single network cable can transmit both data and power without external power supply.
With a 48V DC power supply, there's no need for PoE switches, reducing networking costs.

* Power adapters need to be purchased independently.

Cloud, Making Your Business Easy

Remote monitoring
Remote Wi-Fi management
Standalone cloud portal authentication
Wireless intelligent optimization


Hardware Specifications

Dimensions and Weight


Unit dimensions(W x D x H)

220 mm x 220 mm x 49 mm (8.66 in x 8.66 in x 1.93 in)

Shipping dimensions(W x D x H)

507 mm x 319 mm x 278 mm (19.96 in x 12.56 in x 10.94 in)

Unit weight

Device: 0.6 kg (1.33 lbs)

Mounting bracket: 0.07 kg (0.15 lbs)

Shipping weight

1.04 kg (2.29 lbs)


Wall/Ceiling-mount (A mounting bracket is delivered with the main unit) 

Lock option

Kensington lock and securing latch


Wi-Fi Radio


Radio design


Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO

Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO

Operating frequencies

Radio 1, 802.11b/g/n/ax:

● 2.400 GHz to 2.4835 GHz, ISM

Radio 2, 802.11a/n/ac/ax:  

● 5.150 GHz to 5.250 GHz, U-NII-1

● 5.250 GHz to 5.350 GHz, U-NII-2A

● 5.470 GHz to 5.725 GHz, U-NII-2C

● 5.725 GHz to 5.850 GHz, U-NII-3/ISM

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Data rates

Combined peak data rate: 1.775 Gbps 

2.4 GHz radio, 574 Mbps

● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum)

● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)

5 GHz radio, 1.201 Gbps

● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to 2SS HE80 802.11ax client devices (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

● 802.11b: 1, 2, 5.5, 11

● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24 ,36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz radio

● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT80)

● 802.11ax: 8.6 to 1,200 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)

Packet aggregation

802.11n/ac/ax: A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)

Antenna gain

2.4 GHz: 2 dBi

5 GHz: 4 dBi

Maximum transmit power

2.4 GHz radio: 26 dBm (23 dBm per chain)

5 GHz radio: 26 dBm (23 dBm per chain)

Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.



2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm

5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm

5.470 GHz to 5.725 GHz. EIRP ≤ 30 dBm

5.725 GHz to 5.825 GHz, EIRP ≤ 30 dBm

Power increment

Configurable based on requirement

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM


The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Wi-Fi Radio Frequency Performance


Frequency Band and Protocol

Data Rate

Maximum Transmit Power per Transmit Chain

Maximum Receive Sensitivity per Receive Chain

2.4 GHz, 802.11b

1 Mbps

23 dBm

–91 dBm

2 Mbps

23 dBm

–91 dBm

5.5 Mbps

23 dBm

–90 dBm

11 Mbps

23 dBm

–87 dBm

2.4 GHz, 802.11g

6 Mbps

23 dBm

–89 dBm

24 Mbps

22 dBm

–82 dBm

36 Mbps

22 dBm

–78 dBm

54 Mbps

20 dBm

–72 dBm

2.4 GHz, 802.11n (HT20)


23 dBm

–85 dBm


19 dBm

–67 dBm

2.4 GHz, 802.11n (HT40)


23 dBm

–82 dBm


19 dBm

–64 dBm

2.4 GHz, 802.11ax (HE20)


23 dBm

–85 dBm


15 dBm

–58 dBm

2.4 GHz, 802.11ax (HE40)


23 dBm

–82 dBm


15 dBm

–54 dBm

5 GHz, 802.11a

6 Mbps

23 dBm

–89 dBm

24 Mbps

22 dBm

–82 dBm

36 Mbps

22 dBm

–78 dBm

54 Mbps

20 dBm

–72 dBm

5 GHz, 802.11n (HT20)


23 dBm

–85 dBm


19 dBm

–67 dBm

5 GHz, 802.11n (HT40)


23 dBm

–82 dBm


19 dBm

–64 dBm

5 GHz, 802.11ac (VHT20)


23 dBm

–85 dBm


18 dBm

–60 dBm

5 GHz, 802.11ac (VHT40)


23 dBm

–82 dBm


18 dBm

–57 dBm

5 GHz, 802.11ac (VHT80)


23 dBm

–79 dBm


18 dBm

–53 dBm

5 GHz, 802.11ax (HE20)


23 dBm

–85 dBm


16 dBm

–58 dBm

5 GHz, 802.11ax (HE40)


23 dBm

–82 dBm


16 dBm

–54 dBm

5 GHz, 802.11ax (HE80)


23 dBm

–79 dBm


16 dBm

–52 dBm


Bluetooth Radio



Bluetooth 5.1

Antenna type

1 x onboard built-in omnidirectional antenna

Maximum antenna gain

2.4 dBi, with a downtilt angle of roughly 30 degrees

Maximum transmit power

17 dBm (GFSK)

14 dBm (π/4-DQPSK, 8-DPSK)

Receive sensitivity

–95.5 dBm (DH5)

–95 dBm (π/4-DQPSK)

–87.5 dBm (8-DPSK)


Ports Specifications


Fixed service port

1 x 10/100/1000BASE-T port

● In compliance with IEEE 802.3af standard (PoE)

● Auto MDI/MDIX crossover 

● PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)

● 802.3az EEE

Fixed management Port

1 x RJ45 console port (serial console port)

Status LED

1 x multi-color system status LED


1 x Reset button

● Press the button for shorter than 2 seconds. Then the device restarts.

● Press the button for longer than 5 seconds. Then the device restores to factory settings.


Power Supply and Consumption


Input power supply

The AP supports the following two power supply modes:

● 48 V DC/0.3 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.

● PoE input over PoE-in port: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).


● If both DC power and PoE are available, DC power is preferred.

Overall power consumption

Maximum power consumption: 12.95 W

● DC powered: 12.95 W

● PoE powered (802.3af): 12.95 W

● PoE+ powered (802.3at): 12.95 W

● PoE++ powered (802.3bt): 12.95 W

● Idle mode: 6 W


Environment and Reliability



Operating temperature: –10°C to +50°C (14°F to 122°F)

Storage Temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft), the maximum temperature decreases by 1°C (1.8°F).


Operating humidity: 5% RH to 95% RH (non-condensing)

Storage humidity: 5% RH to 95% RH (non-condensing)

Environment standard

Storage and shipment environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995

Mean Time Between Failure (MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)


Regulatory Compliance


Regulatory compliance

EN 55032

EN 55035

EN 61000-3-3

EN IEC 61000-3-2

EN 301 489-1

EN 301 489-3

EN 301 489-17

EN 300 328

EN 301 893

EN 300 440

FCC Part 15

EN IEC 62311

IEC 62368-1

EN 62368-1

*For more country-specific regulatory information and approvals, contact your local sale agency.


Software Specifications

Applicable Software Version


Applicable software version

AP_RGOS 11.9(6)W1B4 or higher




Recommended maximum number of active devices per AP

64 (for HD Video)/120 (for general usage)

Maximum number of associated clients



The number of associated clients varies according to the environment.

Maximum number of BSSIDs

32 (up to 16 BSSIDs per radio)

STA management

SSID hiding

Band steering

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.

Remote intelligent perception technology (RIPT)

Intelligent client identification technology

Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming


Security and Authentication


Authentication and encryption

Remote Authentication Dial-In User Service (RADIUS) 

PSK, web, 802.1X, MSCHAPv2, PEAP, WPA, WPA2, and WPA3 authentication

Data encryption: WEP (64/128-bit), WPA-TKIP, WPA-PSK, WPA2-AES, WPA3

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist


Dynamic ACL assignment

● ACL assignment based on time spans

● ACL assignment (complete entry) based on MAC addresses

● Execution of pre-configured ACLs (entry index) based on MAC addresses






Routing and Switching


IP service

Static IPv4 address and DHCP-assigned IPv4 address

DHCP Snooping, Option 82, DHCP Server, DHCP Client


Multicast-to-unicast conversion

IPv6 basics

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping

IPv6 DHCP Client

IP routing

IPv4/IPv6 static routing


PPPoE Client

IPsec VPN, up to five IPsec tunnels




Network management

SNMP v1/v2c/v3



Network management platform

Web-based management (Eweb)

Ruijie Cloud

User access management

Console, SSH, and Telnet-based management

FTP Client and TFTP Client

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.

When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.

When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Show More
Resources All Resources
Software and Configuration
Order Information





Wi-Fi 6 (802.11ax) dual-radio indoor wireless access point

Up to four spatial streams

Data rate of up to 1.775 Gbps

1 x 10/100/1000Base-T uplink port, supporting PoE and DC power supply

Bundled with Ruijie Cloud Service lifetime license

 (The PoE injector is sold separately, which could be purchased from Ruijie.

The DC power adapter should be purchased from a third-party vendor separately if needed.)



1-port PoE injector (1000BASE-T, IEEE 802.3af-compliant)


Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details



How can we help you?


Get an Order help


Get a tech support