Picture

RG-CS86-20XS4VS2QXS-D 20-Port 10/2.5GE(SFP+), Layer 3 Ruijie Core/Aggregation Switch with Cloud Management, 4-Port 25/10GE(SFP28), 2-Port 40GE

Suitable for small & medium enterprise core, or large-scale campus network aggregation switch

Modelos

RG-CS86-20XS4VS2QXS-D

20 x 10GE SFP+ ports, 4 x 25GE SFP28 ports, 2 x 40GE QSFP+ ports

Series

Datasheet Sales Enquiry

Características destacadas

20 x 10GE SFP+ ports (Compatible with 2.5GE), 4 x 25GE SFP28 ports, and 2 x 40GE QSFP+ ports for uplink
VSU, realizing flexible networking and high performance
Hardware-level multi-protection, ensuring service continuity
Network security policies and real-time monitoring, enhancing network robustness
Comprehensive QoS policies for flexible network resource allocation and stable services
Diverse network management modes, enabling simple maintenance

Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Features

Cost-effective Full 10GE Layer 3 Core/Aggregation Switch
RG-CS86-20XS4VS2QXS-D

Suitable for SME network core and large-scale network aggregation, 20 x 10GE ports and 4 x 25GE ports for flexible access, 2 x 40GE ports for high-performance uplink

VSU Virtualization, Flexible Networking and High Performance

Millisecond Failover

High Scalability

Simplified Networking

The VSU connects to peripherals through an aggregate link, realizing service switching in milliseconds upon a failure.

VSU virtualization technology is supported to increase bandwidth through link aggregation, which greatly improves forwarding capabilities of the switch.

Multiple physical switches can be virtualized into one logical unit to simplify network configuration and architecture, eliminating loops, and improving reliability.

Hardware Redundancy, Guaranteed Service Continuity
and Network Connectivity

Hot-Swappable Power Modules + Intelligent Fan Modules

Hardware-Level Boot Redundancy

Optical Port Fault Isolation

Power modules can be replaced without affecting device operation. Intelligent fan speed regulation is supported for efficient cooling,
providing dual protection for the network.

Two Flash chips are used to store the system boot program for hardware-level boot redundancy, avoiding device failure caused by a failed Flash chip.

The innovative isolated chip design ensures that short-circuit current cannot reach the power supply chip directly. Failure of one optical module will not affect the normal operation of other optical ports, thus effectively ensuring service stability.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

CPP protects the CPU from data attacks to ensure CPU stability under high usage, achieving significant improvement in the device's security performance.

Abundant QoS Policies for Flexible Resource Allocation,
Making Congestion a Thing of the Past

multi-plane flow classification and control policy based on MAC flow, IP flow and application flow,
accurate resource allocation for multi-service traffic makes congestion a thing of the past, delivering high-quality networks.

Cloud, Make Your Business Easy

Ruijie Cloud

Flexible management modes

SON, zero touch provisioning to Cloud

Configure VLANs on Ruijie Cloud APP

Monitor switch statistics at anytime anywhere

Ease of maintenance, saving onsite labor and cost

Specifications

Hardware Specifications

Hardware Specifications	RG-CS86-20XS4VS2QXS-D
Interface Specifications
Fixed Ports	20 x 1GE/2.5GE/10GE SFP+ ports, 4 x 10GE/25GE SFP28 ports, 2 x 40GE QSFP+ ports. One switch provides a maximum of 32 x 10GE ports, 2 x modular power slots, and 2 x modular fan slots.
Fan module	Dual pluggable modular fans, with front-to-rear ventilation channels Fan speed regulating and alarm function
Power module	2 x replaceable hot-swappable power supply slots
Fixed management port	1 x MGMT port, 1 x console port, and 1 x USB port
System Specifications
Packet forwarding rate	570 Mpps
Switching capacity	760 Gbps
MAC address table size	32,768
ARP table size	16,000
Number of IPv4 unicast routes	16,000
Number of IPv4 multicast routes	4,000
Number of IPv6 unicast routes	16,000
Number of IPv6 multicast routes	2,000
Number of ACEs	In: 2,500 Out: 1,000
Number of VSU members	2
Dimensions and Weight
Dimensions (W x D x H)	440 x 330 x 43.6 mm (17.32 in. x 12.99 in. x 1.72 in.), 1 RU
Weight of the empty chassis	4.6 kg (10.14 lbs.)
CPU and Storage
CPU	Dual-core CPU, 1.25 GHz
Flash memory	1 GB
BootROM	16 MB
SDRAM	1 GB
Data packet buffer	4 MB
Power and Consumption
Power supply	Supported power module type: RG-PA150I-F AC input: Rated voltage range: 100–240 V AC; 50/60 Hz Maximum voltage range: 90–264 V AC; 47/63 Hz Rated input current: 3 A HVDC input: Rated voltage: 240 V DC Maximum voltage range: 192–288 V AC Rated current per circuit: 3 A
Maximum power consumption	< 85 W
Maximum output power	RG-PA150I-F: 150 W
Rated input voltage	RG-PA150I-F: AC input: Rated voltage range: 100–240 V AC; 50/60 Hz HVDC input: Rated voltage: 240 V DC
Maximum input voltage	RG-PA150I-F: AC input: Maximum voltage range: 90–264 V AC; 47/63 Hz HVDC input: Maximum voltage range: 192–288 V DC
Environment and Reliability
Primary airflow	Front-to-rear airflow
Operating temperature	0°C to 50°C (32°F to 122°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% to 90% RH (non-condensing)
Storage humidity	5% to 95% RH (non-condensing)
Interface surge protection	Power port: 6 kV/6 kV Telecom port: 10 kV (MGMT port: 4 kV)
Temperature alarm	Supported

Software Specifications

RG-CS86-20XS4VS2QXS-D
Feature	Description
Ethernet Switching	Jumbo frame (maximum length: 9,216 bytes)
	IEEE 802.1Q (supporting 4K VLANs)
	Voice VLAN
	Super VLAN, private VLAN
	MAC VLAN, port-based VLAN, protocol-based VLAN, IP subnet-based VLAN
	GVRP
	Basic QinQ
	STP, RSTP, and MSTP
	ERPS (G.8032)
	LLDP/LLDP-MED
	LACP (IEEE 802.3ad)
IP Service	ARP
	DHCP client, DHCP relay, and DHCP server
	DHCP snooping
	DNS
	DHCPv6 client and DHCPv6 relay
	DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
IP Routing	Static routing
	RIP and RIPng
	OSPFv2, OSPFv3, IS-ISv4, ISv4, and IS-ISv6
	BGP4 and BGP4+
	IPv4 and IPv6 VRF
	IPv4 and IPv6 PBR
	Equal and Weighted Cost Multi-Path (ECMP)
Multicast	IGMP v1/v2/v3, and IGMP proxy
	IGMP v1/v2/v3 snooping
	PIM-DM, PIM-SM, and PIM-SSM
	MSDP
	MLD v1/v2
	MLD snooping v1/v2
	PIM-SMv6 and PIM-SSM v6
	IGMP filtering, IGMP immediate leave
ACL and QoS	Standard IP ACLs Extended IP ACLs Extended MAC ACLs Time-based ACLs Expert-level ACLs ACL80 IPv6 ACL
	ACL redirection
	Port traffic rate limiting
	Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	802.1p/DSCP/ToS traffic classification Eight priority queues per port
Security	Multiple AAA modes
	RADIUS and TACAS+
	Port-based and MAC-based 802.1x authentication
	Web authentication
	HTTPS
	SSHv1, SSHv2
	Global IP-MAC binding
	Port isolation and port security
	IP source guard
	SAVI
	CPP and NFPP
	Strict and loose RPF
Reliability	REUP, RLDP, DLDP
	IPv4 VRRP v2/v3 and IPv6 VRRP
	BFD
	Hot swapping of power modules and cables
	3-level fan speed adjustment Fan fault alarm
Device virtualization	VSU
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFlow
	NTP and SNTP
	FTP and TFTP
	SNMP v1/v2/v3
	RMON (1, 2, 3, 9)
	Telnet
	NETCONF
	CWMP (TR-069) standard protocol
	gRPC
	Cloud and SON

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Software and Configuration

Order Information

Model	Description
RG-CS86-20XS4VS2QXS-D	20 x 1GE/2.5GE/10GE SFP+ ports, 4 x 10GE/25GE SFP28 ports, 2 x 40GE QSFP+ ports, supports up to 32 x 10GE ports, 2 x slots for power supply module, requires at least one RG-PA150I-F power supply module, 2 x slots for fan modules, 2 x pre-installed fans (Purchase at least one RG-PA150I-F module.)
RG-PA150I-F	150 W AC power supply module for RG-CS86-20XS4VS2QXS-D
Mini-GBIC-GT	1000BASE-GT mini GBIC conversion module
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, SM (850 nm, 500 m, LC).
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, SM (1310 nm, 10 km, LC)
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, SM (1310 nm, 40 km, LC)
MINI-GBIC-ZX80-SM1550	1000BASE-ZX80, SFP transceiver, SM (1550 nm, 80 km, LC)
GE-SFP-LX20-SM1310-BIDI	SFP BiDi transceiver-Tx1310/Rx1550, 20 km, LC
GE-SFP-LX20-SM1550-BIDI	SFP BiDi transceiver-Tx1550/Rx1310, 20 km, LC
GE-SFP-LH40-SM1310-BIDI	SFP BiDi transceiver-Tx1310/Rx1550, 40 km, LC
GE-SFP-LH40-SM1550-BIDI	SFP BiDi transceiver-Tx1550/Rx1310, 40 km, LC
2.5G-SFP-LX03-SM1310-BIDI-I	SFP 2.5G BiDi transceiver-Tx1310/Rx1550, 3 km，LC
2.5G-SFP-LX03-SM1550-BIDI-I	SFP 2.5G BiDi transceiver-Tx1550/Rx1310, 3 km，LC
XG-SFP-SR-MM850	10G LC fiber module, applicable to SFP+ ports, max cabling distance: 300 m
XG-SFP-LR-SM1310	10G LC fiber module, applicable to SFP+ ports, max cabling distance: 10 km
XG-SFP-ER-SM1550	10G LC fiber module, applicable to SFP+ ports, max cabling distance: 40 km
VG-SFP-SR-MM850	25G fiber module
VG-SFP-LR-SM1310	25G fiber module
XG-SFP-AOC1M	10G SFP+ connector fiber, 1-meter long, including one cable and two connector modules
XG-SFP-AOC3M	10G SFP+ connector fiber, 3-meter long, including one cable and two connector modules
XG-SFP-AOC5M	10G SFP+ connector fiber, 5-meter long, including one cable and two connector modules
VG-SFP-AOC5M	25G Base SFP+ fiber cable (including modules on both ends), 5-meter long
40G-QSFP-SR-MM850	40G SR fiber module, applicable to QSFP+ ports (OM3/OM4 MPO interface, 8-core, 850 nm wavelength, max cabling distance: 100 m (OM3), 150 m (OM4)
40G-QSFP-LR4 SM1310	40G LR single-mode fiber module, applicable to QSFP+ ports, max cabling distance:10 km (LC, dual-core, 1310 nm wavelength)
40G-AOC-5M	40G QSFP+ connector fiber, 5-meter long, including one cable and two connector modules
40G-AOC-10M	40G QSFP+ connector fiber, 10-meter long, including one cable and two connector modules

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.